Looking for homebrewing gift ideas? Check out our previous gift guides here or here!
Also, if you enjoy BrewUnited, please consider doing your Amazon shopping via our affiliate link!
Also, if you enjoy BrewUnited, please consider doing your Amazon shopping via our affiliate link!
Jump to:
1
So, my wife hooked me up with a fantastic start at a kegging setup. Three corny kegs, a CO2 bottle, a regulator, a four way manifold, various tubing and such, a temp controller, and one perlick/shank combo.
So, the best I can tell, I can run one keg right now, but expand pretty easily to three - just need the faucets themselves. I think.
Now, on to my utter boob question.
I currently have a batch of brown ale in a carboy that I could have bottled three weeks ago. I'm strongly considering kegging it now.
However, I'm about to brew an IPA, and I certainly want to take advantage of the benefits of kegging (i.e. less oxygen exposure) there.
Is there any reason why I can't keg them both, just switch which one is hooked up to the tap at a given time? Or should I just hold off on one right now until I get another faucet?
Thanks for the input!
Posted 34 days ago.
Switch away. Just keep a couple paper towels and spray bottle of star san handy as there will be some slight leakage when you remove the disconnect.
Posted 34 days ago.
That's what I was thinking... thanks for the prep idea, though. I'd have just made the mess for sure.
Thanks!
Posted 34 days ago.
alternative: buy the gas disconnects (cheap) and tubing (super cheap), and then get a picnic tap setup (also cheap).
I used picnic taps for a while. Dont get me wrong, i love my faucets and would never go *back*, but its a nice short term solution, and great for taking beer somewhere else if you want to have a whole keg with you. Theyre also awesome for filling bottles. Cram a piece of tubing over the end thats about 12" long, turn the pressure way down (i had to do that always when using picnic taps, like 3-4 PSI iirc), and fill like you would from a bottling bucket.
Posted 34 days ago.
Nice idea. I wonder if the LHBS has a picnic tap setup? I believe that I have the disconnects and tubing that I need.
Posted 34 days ago.
I guarantee they sell cobra/picnic taps, likely for about $3.
Nice idea. I wonder if the LHBS has a picnic tap setup? I believe that I have the disconnects and tubing that I need.
View this topic on the BrewUnited forums
Unsubscribe from this topic
Posted 34 days ago.
Good grief, are they THAT cheap?
They carry very little gear, but if they don't have them, I can probably order one from somewhere. Sounds like something I ought to have, just in case.
They carry very little gear, but if they don't have them, I can probably order one from somewhere. Sounds like something I ought to have, just in case.
Posted 34 days ago.
http://www.homebrewing.org/Picnic-Tap-Assembly-MFL-ball-or-pin-lock_p_5916.html
Thats what i bought.
I like my MFL connections.
Posted 34 days ago.
You guys rock. Thanks!
Posted 34 days ago.
Jump to:
1